PHONE: 949.338.8078
FAX: 949.495.4648
30322 Grande Vista Ave
Laguna Niguel, CA 92677
APCI-3016-16
16-bit, 200KHz, 16SE/8DIFF isolated analog input board
 
Features
  • *SPECIAL ORDER*1-2 weeks to shipping
  • PCI 3.3 V or 5 V
  • Optical isolation 1000 V
  • 16/8/4 single-ended (SE) or 8/4/2 differential inputs
  • 16-bit resolution
  • Throughput: 200 kHz
  • Voltage inputs: 0-10 V, 10 V, 0-5 V, 5 V, 0-2 V, 2 V, 0-1 V, 1 V
  • Input voltage is freely programmable for each channel
  • Current inputs: 0-20 mA, as option
  • Programmable gain freely configurable for each channel
  • Several input modes for analog acquisition:
  • 1) Simple mode
  • 2) Scan modes
  • 3) Sequence modes
  • 4) Auto refresh mode
  • Onboard FIFO (for 512 analog values)
  • PCI-DMA for analog data acquisition
  • Overvoltage protection
  • Input filter
  • Protection against high frequency emission
  • 3 timer/counter, 16-bit
  • 2 watchdogs
  • 4 digital I/O, 24 V, optically isolated
  • 24 TTL I/O (3 ports with each 8 channels)
  • Industry standard 37-pin SUB-D connector

Description
    Analog input board, optically isolated, 16 SE/8 diff. inputs, 16-bit
    with extensive software and hardware functionalities:


    The APCI-3016 is a 16-bit analog input board for 3.3 V and 5 V PCI systems, with optical isolation and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.

    Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3010, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filters and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.

    Versions

    APCI-3016-16: 16 SE/8 diff. inputs, 16-bit
    APCI-3016-8: 8 SE/8 diff. inputs, 16-bit
    APCI-3016-4: 4 SE/2 diff. inputs, 16-bit


    Options:

    OPT.DF: Precision filter for 1 diff. channel
    OPT.PC: Current input 0(4)-20 mA for 1 channel (OPT.PC-SE: for Single-Ended, OPT.PC-DIFF: for differential), OPT.SF: Precision filter for 1 SE-channel
    Please specify the amount and numbers of channels to be supplied with the required option.


    Accessories:

    PX_BNC: Connection box for the direct connection of analog voltage and current signals through BNC connectors.

    PX901-AG: Screw terminal panel with transorb diodes with screws with housing for DIN rail for connecting the analog inputs
    ST010: Standard round cable between PX901-AG and APCI-3016, shielded, twisted pairs, 2 m
    ST011: Standard round cable between PX901-AG and APCI-3016, shielded, twisted pairs, 5 m
    PX8000: Screw terminal panel for DIN rail for connecting the digital I/O, timer and counter

    FB8001: Ribbon cable for digital I/O

    ST370-16: Shielded round cable between screw terminal panel PX8000 and APCI-3016, 50-pin, twisted pairs, 2 m

    Connection example: See datasheet (pdf) at:
    http://www.addi-data.com/wEnglisch/index.php

Program / Software Information
    All types of OSs are supported, with specification, manuals, drivers and sample programs available for downloading from:

    http://www.addi-data.com/wEnglisch/index.php



Ordering Information