PHONE: 949.338.8078
FAX: 949.495.4648
30322 Grande Vista Ave
Laguna Niguel, CA 92677
APCI-8001
Motion Control Board, PCI
 
Features
  • *SPECIAL ORDER*1-2 weeks to shipping
  • Axis control for 3 servo or stepper motors
  • Onboard processor
  • Optical isolation
  • 16-bit analog output channels
  • Direct connection of commercially available incremental encoders or SSI absolute encoders
  • Possibility of extension to a total of 8 axes
  • Menu-driven test application
  • Intelligent board based on a 64-bit RISC-processor
  • Positioning of up to 3 axes either with servo or stepping motors. Mixed operation possible
  • for commercially available power amplifiers
  • Linear, circular, helical, spline and CAD interpolation
  • Point to point movement with independent control of each axis
  • All inputs and outputs optically isolated
  • Multiple axis system possible through cascading
  • Gray code operating user interface
  • Table interpolation
  • Scanner functions for measurement tasks
  • Programming through PC application or stand-alone program

Description
    Options

    OPMF/4A (OPMF/4-STP): fourth axis - 8 digital inputs and 4 digital outputs in addition, i.e. 4 axes are available

    OPMF/5A (OPMF/5-STP): fifth axis - 16 digital inputs and 8 digital outputs in addition, i.e. 5 axes are available

    OPMF/6A (OPMF/6-STP): sixth axis - 16 digital inputs and 8 digital outputs in addition, i.e. 6 axes are available

    From OPMF/7, the FB8001 cable is required

    OPMF/7A (OPMF/7-STP): seventh axis - 24 digital inputs and 12 digital outputs in addition, i.e. 7 axes are available

    OPMF/8A (OPMF/-STP): eighth axis - 24 digital inputs and 12 digital outputs in addition, i.e. 8 axes are available

    OPMF-AI12: 4 analog inputs (Option 1-port or 2-port available: max. 8 analog inputs).

    OPMF-DIO: 8 digital intpus and 4 digital outputs, isolated.

    OPMF-AO: 1 analog output, Option max. 5 times available.

    OPT.INTERBUS-8001: Master connection of the APCI-8001

    FB-INTERBUS: Ribbon cable between OPMF and 9-pin SUB-D male connector with bracket for external INTERBUS connection.

    OPT.CAN-8001: CAN bus connection of the APCI-8001 (no CAN Open).



    Find more detailed information about the OPMF options either in an information sheet (pdf) or in the options manual (pdf) at:

    http://www.addi-data.com/wEnglisch/index.php


    Connection

    (Connection example: See data sheet - pdf) at:

    http://www.addi-data.com/wEnglisch/index.php


    FB-CAN: Ribbon cable between OPMF and 9-pin SUB-D female connector with bracket for connecting external INTERBUS.

    FB8001: from the seventh axis (OPMF/7, OPMF/8) or option OPMF-AI12. Ribbon cable between OPMF and a 50-pin SUB-D male connector with bracket

    FB RELAY: For the release of the relays Standard: 9-pin cable with bracket - more than 3 axes: 25-pin cable.

    PX 8000: Terminal board with screw terminals with housing for DIN rail

    ST8001: Cable for connecting the APCI-8001 and OPMF, 50-pin

    FB RELAY_9: Ribbon cable for relase relays: 9-pin SUB-D connector

    FBRELAY_25: Ribbon cable for release relays: 25-pin SUB-D connector

Program / Software Information
    Gray code operating user interface.
    Table interpolation.
    Scanner functions for measurement tasks.
    Programming through PC application or stand-alone program.

    Numerous drivers and example software for several operating systems and applications are available for downloading from:

    http://www.addi-data.com/wEnglisch/index.php



Ordering Information